Reconed Eminence Kappa PRO 12A

Recommended for professional audio in a vented mid-bass, and vented bass enclosure incorporating

a high-pass filter.

Please inquire about alternative impedances.

Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, nontemperature-controlled environment.

The average output across the usable frequency range when applying 1W/1m into the nominal impedance. Ie: 2.83 V/8 ohms, 4 V/16 ohms.

Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software

calibrated) mounted 1m from wall/baffle | 2 ft. X 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with

fiberglass on all six surfaces (three with custom-made wedges)

*

**

***

Nominal Basket Diameter

Nominal Impedance*

Power Rating**

Watts

Music Program

Resonance

Usable Frequency Range***

Sensitivity

Magnet Weight

Gap Height

Voice Coil Diameter

12", 304.8mm

8 ohms

500W

1000W

37Hz

57Hz-2.8kHz

97.1

80 oz

0.375", 9.53mm

3", 76.2mm